Basic things to consider when choosing LED Flood Lights

Flood lights, also known as security lights, offer homeowners a more practical option to incorporating bright exterior lighting to their home exteriors without having to buy very expensive fixtures and numerous bulbs. By strategically installing flood lights, you not only extend the hours which you can use your porch, basketball hoop, or swimming pool, you also dissuade intruders as well as wild animals from entering your home.
 If you are in the process of selecting flood lights for your home, you might be overwhelmed by the wide range of options that are available to you. Having a clear idea of your lighting objective and a thorough knowledge of the various products in the market will enable you to choose the appropriate flood light for your home. Here are some things to consider when buying flood lights:
LED Flood Lights
If you are looking for the most cost efficient exterior security lighting option, go for light emitting diode or LED bulbs. They may cost a bit higher compared to CFLs and other bulb types, but the savings on your electricity bill and their relatively longer lifespan will prove that LEDs offer long term savings. These bulbs consume less energy compared to fluorescent bulbs and have a longer lifespan, lasting as long as 50,000 hours or 46 years, if used 3 hours a day and are kept in good condition. LEDs also produce maximum brightness instantly once the switch is turned on or the sensor is triggered, so there is no delay.
Location
When deciding where to install your flood lights, you will have to remember three things. First, the bulbs should point downward at a 22-degree angle so the flood lights shine brightly on the target without blinding anyone. Second, the light should not be pointed towards a neighboring home as this would not only annoy your neighbors, it can also be taken as an invasion of their privacy. And third, the flood lights should be mounted at least 9 feet from the ground so that it is kept out of reach and to prevent any potential hazards which may be caused by very hot bulbs when touched or tampered.
Motion Sensors
Flood lights with infrared sensors have a 180-degree range of motion, picking up on heat waves when someone or something within this range is in motion. Depending on the sensor, the light will remain active for 1 to 10 minutes and then shut off automatically. This is a great safety feature which also helps save energy in cases when the homeowner forgets to turn the lights off.
Dusk to Dawn Lights
If your primary concern is security, dusk to dawn lights are the best available option for you. These security flood lights automatically turn on once the sun begins to set and off again as the sun rises in the morning. If you do decide to utilize this type of flood lighting, you will need to be extra cautious and consult with your neighbors, making sure that an all-night light would not disturb them in any way.
Finish
Lastly, you will also need to take into consideration the aesthetic features of the flood lights that you will be purchasing. There are many different finishes available. Popular choices include copper, stainless steel, and colored lacquer on top of aluminum. The general rule of thumb is, pick a finish that matches the color or the style of the home.

Read more:
Commercial LED Lights Houston

LED Lighting is at a Tipping Point 2018

Light-emitting diode or LED lighting has improved greatly in just the past few years. The quality of light produced by LED lamps has evolved from what many considered either too harsh or not bright enough, to a full range of brightness cross-matrixed with a full range of color temperatures ranging from warm and soft to cool and bright. Package styles, performance and sizes now match traditional halogen and fluorescent technology lamps.

Advancements in LED lighting give these lamps some solid advantages over legacy lamp technologies:
1. LED Lights are much more efficient and use much less energy than competing fluorescent and halogen lighting technologies.
2. Although Compact Fluorescent Lamps (CFLs) have taken a foothold in energy-efficient lighting in recent years, LEDs have the advantages of instantaneous light with no “warm up” time, a more compact size, and longer life.
3. LEDs have a lifespan of many times that of competing technologies.
4. Safety. Did you know that in traditional lamps 90% of the energy is heat, but in LEDs it is significantly less? Also, unlike fluorescent lamps, LEDs do not contain mercury.
5. Brightness. LED technology allows for a broad range of light brightness, color and temperature. Dimmers can be used to allow users to control brightness. However we recommend checking the compatibility first.
6. Form factor. LEDs are available in flexible strips, allowing neater solutions for cove lighting and other types of lighting, as they can be bent around corners—unlike fluorescent tubes.
7. LEDs are better suited to lighting-control partnerships—compared to CFL and HID solutions—due to their dimming abilities, instant start and so forth. They also allow the control system to dim or switch off lights in areas that are not being used.
8. LEDs can now perform like traditional lamps. As you dim the lights, the color temperature warms, allowing the user to save energy and still retain the aesthetic appeal of traditional technologies.
9. LEDs are also now available with high CRI (Color Rendering Index) values of +90, resulting in a good reproduction of color. This is similar to halogen, which was seen as a weakness in the early-generation LEDs.

Shop now commercial LED lights in Houston, Oorjam Inc is a leading online retailer of LED lighting products like wall pack lights, flood lights, High and low bay series, canopy lights, LED Panels, Street lights. Get Top brands of LED light bulbs, Energy efficient Halogen Light Bulbs at lowest prices

Read More:

History of Light Bulbs

What You Need to Know About LED Bulbs

Just a few years ago, using energy efficient light bulbs meant, quite literally, going green—thanks to the ghoulish tint those spiral-shaped compact fluorescent bulbs cast. But with high tech LED (light-emitting diode) bulbs now selling at fairly affordable prices (about $6 to $10 per 75-watt equivalent bulb), you can easily lower your energy costs, help the environment, and illuminate your house with bright, white light. Still, buying the bulbs isn’t as simple as just shopping for the “watt equivalency” of the standard bulbs you’re replacing. Here are four things to think about before you invest in LEDs.
LEDs can brighten a dimly lit house.

If your living space is short on light fixtures and lamps, you can use LEDs to brighten interiors by selecting a watt equivalency that’s higher than that of the old bulbs, says New Haven lighting designer Mark Loeffler. Many fixtures contain a warning not to use anything higher than a 60-watt bulb because the fixture can’t take the heat higher wattage bulbs generate, and it would therefore be a safety hazard. But there’s no problem using a 100-watt equivalent LED bulb, which is only about 17 watts and therefore well under the safety limit of a 60-watt maximum fixture. You get lower energy bills and also two times more light output (measured in lumens, also labeled on product packaging), possibly saving you from buying expensive new floor lamps or installing additional hard-wired fixtures (at $300 to $800 each).

You'll need new dimmers.

If you’re adding LED bulbs to fixtures on dimmers, make sure to select dimmable LEDs—and plan to replace your dimmer switches too. Using dimmable LEDs is not as simple as just screwing them into your existing fixtures. Dimmers designed for standard incandescent bulbs will often cause LEDs to buzz or hum annoyingly. You need to swap in an LED-friendly dimmer—better yet, one that’s specifically listed on the bulb packaging as being compatible with the bulb. You’ll pay about $25 for the switch and perhaps another $25 to have it professionally installed (with a $100 to $200 minimum labor charge).

LED bulbs may have a shorter lifespan than you'd expect.

Screw-in LEDs require no retrofitting into existing sockets because they contain not just the light-emitting diode but also the electronic driver that makes it work. (In a special LED fixture, by contrast, the driver is in the light fixture and the bulb contains only the diode.) “The ads say LED bulbs will last for 40 years, but it’s the driver that determines the life of the bulb,” says Chesapeake, Va., kitchen designer Dave Alderman. “You’re lucky to get a five-year warranty on bulbs with built-in drivers.” Swapping in LED trim kits with higher quality drivers would cost about $50 to $85 each, and that’s when you can expect super long bulb life.

LED bulbs come in a wide range of colors.

Take a look at the LED packaging to see the product's K ratings. K stands for Kelvin, a measure of “color temperature” (the color of light), and you can find bulbs anywhere from 2,700 to 6,500 Kelvin. In general, bulbs up to 3,000k produce warm (slightly yellow) light that’s relaxing and therefore ideal for general living spaces; bulbs from 3,200k to 4,500k are cool (white) light that’s perfect for workspaces such as kitchens, bathrooms, and garages; anything over 4,600k is considered daylight and is best used for outdoor and security lighting. Another measure of color quality is CRI—color rendering index—which indicates how accurate colors look in the light from the bulb. Make sure LEDs you buy have a CRI of 80 or higher.

led lights Houston
led store Houston
led lighting Houston
LED Showroom Houston
Commercial Lighting Houston
Commercial LED Lights Houston
Houston light bulbs
Houston halogen light bulbs
light bulbs Houston
halogen light bulbs Houston
led bulbs Houston